Filters
Collection
361 Results
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042
-
HMAS Brisbane : Engine Room : Gauge board valve body
Technology
Maker: Unknown
The gauge board valve body is a circular, grey metal unit. On the front of the valve is a brass indicator panel. At the top of the panel is engraved SHUT, while at the bottom of the panel is engraved ...REL32981.041
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Unknown Weksler Instruments
The gauge is circular, with a machined alloy body and a grey rim. The face is white and is protected by an acrylic Perspex disc. It is calibrated from 0-1000 and has a red line indicator at 350. Nomen...REL32981.006
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body with a grey rim. The face is white and is protected by an acrylic Perspex disc, calibrated from 0-1000 PSIG. There is a red indicator line at 500. Nome...REL32981.007
-
HMAS Brisbane : Engine Room : Light and Warning Sign
Technology
Maker: Unknown
The fluorescent light has a rectangular pressed metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the ...REL32981.004
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator Gauge
Technology
Maker: Unknown
The propeller revolution indicator gauge has a square cast alloy cover, with an inset circular acrylic disc in the middle. The cast alloy body of the unit is attached to the Engine Room gauge board. T...REL32981.024
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Electric Tachometer Corp
The propeller revolution indicator-transmitter consists of a rectangular case alloy case with rounded corners. There are cable access holes on the top and bottom of the unit. A cast alloy cover is att...REL32981.039
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The propeller revolution indicator/transmitter consists of a cast alloy body, painted grey. The front cover is a rectangular alloy sheet, secured by eight screws. On the cover of the unit are three in...REL32981.023
-
HMAS Brisbane : Engine Room : Rudder Angle Indicator
Technology
Maker: Sig-Trans Inc.
The rudder angle indicator has a rectangular cover with 5 screw holes and an inset circular acrylic disc in the middle. Above the disc is a black plaque reading RUDDER ANGLE IND. Below the disc is a n...REL32981.021
-
HMAS Brisbane : Engine Room : Salinity Indicator
Technology
Maker: Marine Electric Corporation Unknown
The salinity indicator consists of a rectangular steel case. At the rear, four attachment brackets have been cut. A rectangular access panel was mounted on the bottom (missing). The cover is hinged on...REL32981.028
-
HMAS Brisbane : Engine Room : Siren Type 1C/S2S
Technology
Maker: Federal Sign and Signal Corporation
The siren consists of a cylindrical cast alloy case and circular front cover with cut-outs. The circular cover also has `Federal Sign and Signal Corp ' Blue Island Illinois' engraved on the metal. The...REL32981.032
-
HMAS Brisbane : Engine Room : Status Board No.1 Engine room
Technology
Maker: Unknown
The status board is located in the HMAS Brisbane Engine Room. The board is made up of a rectangular piece of wood, covered with a rectangular piece of white plastic, which is glued to the front. On th...REL32981.001
-
HMAS Brisbane : Engine Room : Switch unit
Technology
Maker: Palmer Unknown
The brass switch consists of a pressed metal case with a single attachment bracket welded to the back and drilled for two bolt holes. There are two cable fittings in the side of the case. The face is ...REL32981.031
-
HMAS Brisbane : Engine Room : Tartar Missile Launch Magazine Plate
Technology
Maker: Unknown
The tarter missile launch plate is a rectangular alloy plate with printed instructions for procedures that should be followed in case of Harpoon Fuel Leakage. It also contains instructions for recomme...REL32981.008
-
HMAS Brisbane : Fencing and Cabling missile launch cap
Technology
Maker: Unknown
The fencing and cabling is made up of four 1420mm long and three 1115mm long grey metal poles. The poles are 50mm in diameter. Each pole is secured to a metal bracket at its base which is then bolted ...REL33076
-
HMAS Brisbane : Fire Extinguisher holder
Technology
Maker: Unknown
The fire extinguisher holder is rectangular at the back with angles sides and base. It is made of metal and painted red. It has a black belt with buckle connected to the left hand side, which is used ...REL32993
-
HMAS Brisbane : Flag Locker
Technology
Maker: Unknown
The flag locker consists of a rectangular alloy casing, made of riveted sheets attached to a welded alloy L channel frame. The top edge of the case is angled with the height of the unit rising toward ...REL33210
-
HMAS Brisbane : Flag Locker : Alphabetical flag 'A for Alpha'
Technology
Maker: Harry West Flags
Standard forked flag used on the HMAS Brisbane. The background (field) is divided into two sections. The first third of the flag (from the hoist) is white, the remaining two thirds is blue. The flag r...REL33210.081
-
HMAS Brisbane : Flag Locker : Alphabetical flag 'B for Bravo'
Technology
Maker: Harry West Flags
Standard forked flag used on the HMAS Brisbane. The background (field) is completely red. The flag represents the letter ‘B’ for Bravo, and also has the meaning ‘I am taking in or discharging explosiv...REL33210.083